KAC-8104D
Class D Mono Power Amplifier
| The KAC-8104D Class D Mono Power Amplifier has a small foot print and a mighty powerful kick. Ready to pump out 1000 Watts Max Power, the KAC-8104D includes a built-in infrasonic filter that helps subwoofers perform their best by sharply cutting off inaudible frequencies below 15 or 25 Hz. | |
| |
| • | 1000 Watts of Power with 30% Smaller Chassis Size | | • | CEA Rated: 300W (1.0% THD+N) (4Ohm/1Ch) | | • | CEA Rated: 500W (1.0% THD+N) (2Ohm/1Ch) | | • | High Quality Speaker Level Input and Blue Illumination | | • | Variable low-pass filter (50-200 Hz at -24 dB per octave) | | • | Bass Boost Control 0-18 dB at 40 Hz) | | • | Subsonic filter (15/25 Hz, 18 dB/octave) | | • | Speaker-level inputs with signal sensing turn-on | | • | Preamp-level inputs and outputs | | • | Fuse rating: 40A x 1 | | • | 11-1/16"W x 2-3/8"H x 9-7/8"D |
|
| Amplifier Type | Class-D | | Band Reject Filter | - | | Band Reject Filter Frequency | - | | Bass Boost Circuit | - 18 dB (Variable) | | Bass Boost Frequency | 40Hz | | Channel Design | Mono | | Cooling System | Slient Fans | | Current Consumption | 40A | | Delay Control | - | | Frequency BAND 1 (Front, Rear) | - | | Frequency BAND 2 (Front, Rear) | - | | Frequency BAND 3 (Front, Rear) | - | | Frequency BAND 4 (Front, Rear) | - | | Frequency BAND 5 (Front, Rear) | - | | Frequency Response | 5K - 200Hz | | Gain (Boost or Cut) | - | | High-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range---Hz (Variable)
High Range---Hz (Variable) | | Infrasonic Filter | 15,25Hz-15,25Hz (Selectable), -24dB/oct | | Input Impedance | 10  | | Installation Size (W x H x D) | 11" x 2-5/16" x 9-3/8"
280 mm x 59 mm x 238 mm | | Installer Memory |  | | LED Information Display | Voltage, Current, Temperature | | Low-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range50-200Hz (Variable)
High Range50-200Hz (Variable) | | Maximum Output Power | Watts | | Operating Voltage | 1000V DC | | Output | 1-channel RCA | | Phase Inverter | ° (Normal) / -180° (Reverse) | | Power Supply | Single Power Supply | | Power Wire Gauge | 4-Gauge | | Protection Circuit | Yes | | Quality Factor BAND 1 - BAND 3 | - | | Quality Factor BAND 4 - BAND 5 | - | | Rated Output Power | Rated Power Output(12.0V)
4Ω -W x -
2Ω -W x -
Bridged4Ω -W x -
1Ω -W x -
Rated Power Output(14.0V)
4Ω 300W x 1
2Ω 500W x 1
Bridged 4Ω -W x -
1Ω -W x - | | Remote Bass Control | - | | RMS Watts Per Channel @ 4 Ohms, 1% THD+N | 300W x 1 | | Sensitivity | 0.2V - 5.0V | | Signal Sensing Turn On | Yes | | Signal-to-Noise Ratio | 100dB
85dBA (Ref: 1 Watt into 4) | | Speaker Wire Gauge | 12-Gauge | | Terminal Layout | One-Sided | | WARRANTY | 1 - Year Parts & Labor | | Weight | 5.9 lbs (2.7 kg) |
|
|